Getting Started with Altera’s DE2 Board. Installation and USB-Blaster Driver. The DE2 board features a powerful Cyclone. Altera driver information for the EthernetBlaster, USB-Blaster, ByteBlaster II, ByteBlasterMV, MasterBlaster, and BitBlaster cables, APU, MPU and T-guard software dongle. Download the latest drivers for your Altera USB-Blaster to keep your Computer up-to-date. ‧ Compatible with Altera USB Blaster ‧ Support JTAG Voltage: 2.5V ~ 3.3V ‧ Better anti-noise capabilities ‧ The same circuit is used in Altera DE2 Board.
Altera JTAG Blaster Provides JTAG connectivity for Altera devices only Altera USB Blaster It is designed to program CPLDs and FPGAs from Altera only. It allows JTAG connectivity of any target device voltage from +1.2V to +5V. The Altera JTAG Blaster is compatible with Windows PCs Only. It is not compatible with Linux. Compact Size This device connects to an open USB port on a Windows PC and allows the Quartus Programmer application to directly program Altera devices. Installation of the EPT-JTAG- Blaster Driver is required for this device. This is provided by Earth People Technology allows this board to be used by the Quartus Application Programmer.
Once this driver has been successfully installed, the device can be found in the Hardware Setup drop down box. Just select the device and the programming mode and the appropriate programming file and the board will program your device.
Features • Programs Altera MAX II, MAX V, MAX10, • Cyclone IV, Cyclone V, Stratix IV, Stratix V devices • Programs JTAG, AS and PS modes • Works with SignalTap II Logic Analyzer • 10 pin header with Altera Standard pinout • Connect LED indicates USB Enumeration • Ultra Small footprint • Micro B USB connector • Multivolt I/O operation from +1.2V to +5V Shipping.
Cecelia Ahern Ps I Love You Pdf. — Interface Driver: usb_blaster USB JTAG/USB-Blaster compatibles over one of the userspace libraries for FTDI chips. These interfaces have several commands, used to configure the driver before initializing the JTAG scan chain: — Config Command: usb_blaster_device_desc description Provides the USB device description (the iProduct string) of the FTDI FT245 device. If not specified, the FTDI default value is used. This setting is only valid if compiled with FTD2XX support. — Config Command: usb_blaster_vid_pid vid pid The vendor ID and product ID of the FTDI FT245 device. If not specified, default values are used.
Currently, only one vid, pid pair may be given, e.g. For Altera USB-Blaster (default): ft2232_vid_pid 0x09FB 0x6001 The following VID/PID is for Kolja Waschk's USB JTAG: ft2232_vid_pid 0x16C0 0x06AD I have tried the bove commands but it is not recognised as an interface. Tried with two versions. Nba Live 2008 Patch Euroleague.
Comments are closed.